Mathematics Study Guide for the ParaPathways
Page 4
Converting to a Different Form
Fractions, decimal numbers, and percentages are all different ways of describing a part of a whole. As such, it is often necessary to convert from one form to another. Sometimes you will be given multiple values in the different forms, or sometimes a question will ask for your answer in one form, while the values are given in another. As such, the ability to convert between them is vital.
You’ve just learned how to convert percentages to decimals. Let’s look at the other conversions.
Fractions to Decimals and Vice Versa
As you have already learned, a fraction like \(\frac{1}{10}\) is equivalent to the decimal \(0.1\). When a fraction’s denominator is a power of \(10\) (such as \(10\), \(100\), or \(1{,}000\)), converting to a decimal is simple. It’s a bit more complex when the denominator is another number.
For instance, what is \(\frac{1}{2}\) as a decimal? The important thing to remember is that a fraction is really just division. When you see \(\frac{1}{2}\), you can think, “What is \(1\) divided by \(2\)?” With something that simple, you probably just know the answer is \(0.5\). With larger fractions, you may need to do long division. For instance, to convert \(\frac{12}{20}\) to a decimal, you divide \(12\) by \(20\):
\[\begin{array}{r} \phantom{20)}0.6\\[-3pt] 20\,\overline{)12.0}\\[-3pt] \phantom{20)}\underline{12\phantom{.}0}\\[-3pt] \phantom{20)12.}0 \end{array}\]So, \(\frac{12}{20} = 0.6\).
Converting from decimals to fractions is even easier. Write the digits after the decimal point over the place value of the last digit (\(10\) for tenths, \(100\) for hundredths, \(1{,}000\) for thousandths, and so on), and then reduce. For instance, the last digit of \(0.34\) is in the hundredths place, so:
\[0.34 = \frac{34}{100} = \frac{17}{50}\]Decimals to Percentages and Vice Versa
When you learned about percentages earlier, you converted a percentage to a decimal number to do multiplication. To do this, drop the percent sign and divide the number by \(100\):
\[54\% = 0.54\]To convert the other way, move the decimal point two places to the right and add a percent sign, like this:
\[0.68 = 68\%\]Fractions to Percentages and Vice Versa
Converting between fractions and percentages is a little more involved, but the process is simple once you’re familiar with it. There are actually two methods you can use. Pick the one that makes more sense to you and works for the particular problem.
Fraction to Percentage
Method 1—Use a Decimal as a “Bridge”
This two-step method works every time and is very straightforward:
-
Divide the numerator by the denominator to turn the fraction into a decimal.
-
Move the decimal point two places to the right and add a percent sign.
Here is an example:
Convert \(\frac{3}{4}\) to a percentage.
First, convert the fraction to a decimal:
\[3\div4=0.75\]Next, move the decimal point two places to the right and add the percent sign:
\[75\%\]So, \(\frac{3}{4}=75\%\).
Method 2—Use an Equivalent Fraction
This method is faster but only works with “friendly” denominators—ones that divide evenly into \(100\), like \(2\), \(4\), \(5\), \(10\), \(20\), \(25\), and \(50\). Otherwise, you’ll want to use the first method. Here is an example:
Convert \(\frac{3}{5}\) to a percentage.
Ask yourself, “What do I multiply \(5\) by to get \(100\)?” The answer is \(20\).
So, you will multiply both the numerator and denominator by \(20\):
\[\frac{3}{5}=\frac{3\times20}{5\times20}=\frac{60}{100}=60\%\]Therefore:
\[\frac{3}{5}=60\%\]Percentage to Fraction
Converting the other way is perhaps even easier. First, remove the percent sign and write the number over \(100\) (remember, “percent” means “per hundred”). Then, simplify the fraction if possible.
Look at this example:
\[40\%=\frac{40}{100}\]Convert \(40\%\) to a fraction.
Simplify by dividing the top and bottom by \(20\):
\[\frac{40}{100}=\frac{40\div20}{100\div20}=\frac{2}{5}\]So, \(40\%=\frac{2}{5}\).
Equivalent Numbers
One of the key concepts when dealing with fractional numbers is equivalency, which simply means that numbers, in whatever form they appear, are the same. For instance, \(\frac{2}{4}\) and \(\frac{3}{6}\) are equivalent fractions because they can both be reduced to another equivalent fraction, \(\frac{1}{2}\).
Numbers don’t have to be in the same form to be equivalent. For instance, \(0.5\) and \(\frac{1}{2}\) have the same value. You can see this by using the conversion tactics you just learned. You could divide \(1\) by \(2\), or you could turn \(0.5\) into the fraction \(\frac{50}{100}\), which reduces to \(\frac{1}{2}\). If you were also given the percentage \(50\%\), you now have the skills to prove it is also equivalent.
Let’s try an example problem.
\[\frac{3}{4}, \quad0.7 , \quad \frac{6}{9}, \quad 0.75\]Are any of these numbers equivalent?
Solution
When determining equivalency, you want to convert all given numbers to a single form for easier comparison. In this case, it’ll be easier if we make sure all the numbers are reduced fractions:
-
The first fraction, \(\frac{3}{4}\), is already reduced to its simplest form.
-
The decimal \(0.7\) is “seven-tenths,” which converts to the fraction \(\frac{7}{10}\), which is reduced.
-
\(6\) and \(9\) share a factor of \(3\), so \(\frac{6}{9}\) reduces to \(\frac{2}{3}\).
-
The decimal \(0.75\) is read as “seventy-five hundredths,” which can be written as the fraction \(\frac{75}{100}\). That is not the reduced form, so divide both the numerator and denominator by \(25\) to get \(\frac{3}{4}\).
After reducing, the four fractions are \(\frac{3}{4}\), \(\frac{7}{10}\), \(\frac{2}{3}\), and \(\frac{3}{4}\). Since the first and last match, \(\frac{3}{4}\) and \(0.75\) are equivalent.
Ordering Fractional Numbers
Checking whether numbers are equal is one skill; deciding which is larger is another. Sometimes you’ll need to arrange a list of numbers from least to greatest or from greatest to least. The quickest approach is usually to rewrite every number as a decimal first. For instance, say you have these numbers:
\[\frac{9}{10},\quad 0.37,\quad \frac{1}{4},\quad \frac{46}{100}\]You will want to convert them:
\[\frac{9}{10} = 0.9\] \[0.37\, \text{(no change needed)}\] \[\frac{1}{4} = 1 \div 4 = 0.25\] \[\frac{46}{100} = 0.46\]So, we have \(0.9, 0.37, 0.25,\) and \(0.46\).
To be sure we are accurately comparing decimals, it helps to line them up vertically, like this:
\[\begin{align} 0.90 \\ 0.37 \\ 0.25 \\ 0.46 \\ \end{align}\]It’s a good idea, also, to insert zeros if there is no number to the left of the decimal point (there sometimes will be) and fill in trailing zeros at the end of numbers to make the number of decimal places the same.
Since there are no whole numbers, start with the tenths place. All of those numbers are different, so we can just order the numbers by that place from least to greatest:
\[0.25,\quad 0.37,\quad 0.46,\quad 0.9\]If any of the tenths place numbers had been equal, we would have looked at the hundredths place to determine which of those was greater. For instance, \(0.38\) is greater than \(0.37\).
All Study Guides for the ParaPathways are now available as downloadable PDFs