Mathematics Study Guide for the ParaPathways
Page 3
Decimals
Decimals are another way of writing fractions and mixed numbers, based on powers of \(10\), the base of our number system. Decimal numbers are common in the real world, particularly when dealing with currency and the cost of items.
Decimal Place Value
Decimal numbers are indicated with a decimal point, a dot that splits the whole number part (to the left of the dot) from the fractional part (to the right). Just as you learned about place values when learning about whole numbers, there are place values with decimal numbers. Here is a chart displaying the common whole and decimal place values:

Note: The fractional values all have “ths” at the end, which differentiates them from their whole value counterpart.
A fraction with a denominator of \(10\), \(100\), \(1{,}000\), or another power of ten can be written directly as a decimal number. For example:
\[\frac{1}{10} = 0.1\] \[\frac{38}{100} = 0.38\]Decimal numbers less than \(1\) are usually written with a placeholder zero to the left of the decimal point, as in \(0.1\) and \(0.38\). Furthermore, if you see trailing zeros after a decimal, you can ignore them, no matter how many there are. For instance, \(0.1000\) is the same as \(0.1\), and it’s cleaner to use the latter.
Operations with Decimals
It is not enough to know that decimal numbers represent fractions. You’ll need to be able to work with decimals to arrive at answers, including performing the four basic operations.
Addition and Subtraction
To add or subtract decimals, write the numbers in a column with the decimal points stacked directly on top of each other. Then add or subtract just as you would with whole numbers, and bring the decimal point straight down into the answer. Here is an addition example:
\[\begin{align} 23.45& \\ \underline{+\;\,4.32}& \\ 27.77& \\ \end{align}\]And this is subtraction with decimals:
\[\begin{align} 31.98& \\ \underline{-\;\,10.42}& \\ 21.56& \\ \end{align}\]Note: When adding or subtracting, always keep the decimal points aligned.
Helping Students: If a student adds \(2.5 + 1.25\) and gets \(1.50\), they probably lined up the last digits instead of the decimal points. Have the student rewrite the problem with the decimal points stacked, writing \(2.5\) as \(2.50\) so both numbers have the same number of decimal places. The correct sum is \(3.75\).
Multiplication
To multiply decimals, multiply vertically as you would with whole numbers. Next, add up how many digits sit to the right of the decimal point in both factors combined. In the product, start at the far right and move left that many places, then insert the decimal point.
Here is an example:
\[\begin{align} 2.3& \\ \underline{\times 1.4}& \\ 92& \\ \underline{+230} \\ 3.22 \end{align}\]As you will have noticed, there were a total of two decimal places in the two factors (one in each), so we counted two places from the right in the product and placed the decimal point there, converting \(322\) to \(3.22\).
Division
As with multiplication, division with decimals is essentially the same as dividing with whole numbers. However, there are extra steps:
-
Shift the decimal point in the divisor to the right until the divisor is a whole number, keeping track of how many places you moved it.
-
Shift the decimal point in the dividend to the right by that same number of places.
-
Divide using normal long division.
-
Place the decimal point in the quotient directly above the new decimal point in the dividend.
Here is an example:
\[2.88 \div 1.2\]-
Convert the divisor, \(1.2\), into a whole number, \(12\). The decimal point moved one place to the right.
-
Shift the decimal point in the dividend, \(2.88\), one place to the right as well, making it \(28.8\).
-
Now, do long division:
The answer is \(2.4\) (not \(24\)), because the decimal point in the quotient goes directly above the decimal point in the dividend.
Note: To check a division answer, multiply the quotient by the divisor:
\[\begin{align} 12& \\ \underline{\times 2.4}& \\ 48& \\ \underline{+240} \\ 28.8 \end{align}\]Percentages
A percent is a type of fraction whose denominator is always \(100\). The word percent actually means “per one hundred.” A percentage is written using a percent sign (\(\%\)), such as \(50\%\) (read as “fifty percent”).
Percents tell you how many items out of \(100\) have a certain characteristic. For example, if a store had \(100\) apples and \(30\%\) of them were yellow, \(30\) apples would be yellow, and the other \(70\) apples would be another color.
The Meaning and Uses of Percent
In the real world, and on the ParaPathways test, you won’t always have a total of \(100\) items. For instance, in the example above, if the store only had \(30\) total apples, there still could be \(30\%\) that were yellow. How would you determine what number was represented by \(30\%\)?
What you need to understand is that percentage problems are generally multiplication (or division) problems. If you read “\(30\%\) of \(30\) apples are yellow,” you should think of it as meaning:
\[30\% \times 30 = ?\]But how do you multiply by a percentage? Just remember that a percentage is another way of writing a decimal to the hundredths place value. So, \(30\%\) equals \(0.30\), which means the real problem is:
\[0.30 \times 30 = ?\]Now it’s just basic multiplication with decimals:
\[\begin{array}{r} 30\\ \times 0.30\\ \hline 00\\ 900\\ \hline 9.00 \end{array}\]So, in the end, there are nine apples out of \(30\) that are yellow. As a fraction, that would be \(\frac{9}{30}\) or, once reduced, \(\frac{3}{10}\).
In that example, you were given a total and a percentage and had to find the numerical value of the part. Sometimes, though, you’ll be given the total and the part and need to find the percentage, or you’ll be given the part and what percentage it represents and need to find the whole. Let’s try an example problem.
A store is having a sale, and all items are \(25\%\) off. If the jacket Wanda wants to buy now costs \(\$60\), what was the original price? How much money will Wanda save with the discount?
Solution
First, we will identify what we know. The discount is \(25\%\), which means the current cost, \(\$60\), is \(75\%\) of whatever the original price was. Let’s start by figuring out the original price. To solve this, we set up a simple equation:
\[0.75x = 60\]Since \(x\) is multiplied by \(0.75\), we divide both sides by \(0.75\):
\[x = \frac{60}{0.75} = 80\]Therefore, the original price was \(\$80\). Furthermore, the amount Wanda will save is \(\$80-\$60 = \$20\).
All Study Guides for the ParaPathways are now available as downloadable PDFs