Mathematics Study Guide for the ParaPathways

Page 7

Measurement: Part 2

In addition to the previously discussed measurement concepts, the following are also important for success on the ParaPathways test. Be sure to note the different units of measurement used in these, as well.

Measuring Liquid Volume

Liquid volume tells us how much space a liquid takes up. Even if you’re not thinking about it as measuring, you are considering liquid volume all the time when you do daily tasks like pouring a glass of milk or measuring water for a recipe. Here’s what you need to know about measuring the volume of liquids.

United States Customary Units

Once again, in the United States, we commonly use US customary units to measure liquid volume. The following chart shows the basic units of measure and how they relate:

10 Liquid Measurement US Customary (1).png

Note: Liquid volume is different from weight (which is also measured in ounces). A cup of feathers and a cup of lead have the same volume (one cup), but very different weights. For now, just focus on the amount of space the liquid takes up, not how heavy it is.

Unit Conversion

Just as with length, you often need to convert liquid measurements from one unit to another. For example, you might need to know how many cups are in two pints, or how many fluid ounces are in three cups. Thankfully, the rules for when to multiply or divide remain the same.

Use those rules and the chart above to solve these example problems.

Example 1

Convert two gallons to quarts.

Solution

Though what you’re measuring and the units have changed, the math remains the same. You’re going from a bigger unit (gallons) to a smaller unit (quarts), so you multiply by the conversion value, which is \(4\) in this case:

\[2 \times 4 = 8\]

Therefore, there are eight quarts in two gallons.

Example 2

Convert eight cups to quarts.

Solution

This is another example where you’ll want to do two conversions, first from cups to pints, and then from pints to quarts. Looking at the chart, you’ll see that cups are smaller than pints and pints are smaller than quarts, so you’re going from a smaller unit to a larger one, which involves division. There are two cups in a pint, so that’s your first divisor:

\[8 \div 2 = 4\]

There are two pints in a quart, so you again divide by \(2\):

\[4 \div 2 = 2\]

Therefore, there are two quarts in eight cups.

Metric Units

Just like with metric length, metric liquid volume is based on powers of \(\bf10\). This makes conversions very easy, often accomplished by just moving a decimal point. The basic unit of liquid volume in the metric system is the liter. We’ve presented the most commonly used metric measurements for liquid volume on this chart:

11 Liquid Measurement Metric Units (1).png

Unit Conversion

When converting metric units of liquid volume, the rules are the same as for the other units; you’ll just need to know the conversion factors between the different units. Let’s try an example problem.

If a pool can hold \(2.5\) kiloliters of water, how many milliliters can it hold?

Solution

As you’ve seen, the first step is determining if you’re going from bigger to smaller units, or vice versa. In this case, we’re going from kiloliters to milliliters, so that’s bigger to smaller. That means you will multiply. There are two levels of conversion, from kiloliters to liters, and from liters to milliliters, so we’ll set up two successive operations:

\[2.5 \times 1{,}000 = 2{,}500\] \[2{,}500 \times 1{,}000 = 2{,}500{,}000\]

Wow! That pool can hold \(2{,}500{,}000\) milliliters of water!

Measuring Mass

Mass tells us how much matter is in an object. While the terms are sometimes used interchangeably in common usage, in science mass is different from weight. Weight can change depending on gravity (you would weigh less on the moon), but mass stays the same no matter where you are.

For the ParaPathways test, you just need to know that mass measures how much “stuff” is inside an object. Mass is measured in metric units. (The US customary system measures weight instead, as explained at the end of this section.) As with all metric units, these are based on powers of \(10\). If you recall the metric prefixes we’ve already discussed, this will be simple. For real-world comparisons, this chart shows some commonly used mass measurement units:

12 Mass Measurement Units (1).png

Unit Conversion

The rules remain the same, so use the chart above to solve these two questions.

Example 1

A bag of rice has a mass of three kilograms. How many grams is that?

Solution

The first step is identifying the conversion factor, which is from kilograms to grams. If you recall, kilo means \(1{,}000\), and you’re going from a bigger unit to a smaller one, so you must multiply:

\[3 \times 1{,}000 = 3{,}000\]

Therefore, the bag of rice has a mass of \(3{,}000\) grams.

Example 2

A bag of apples has a mass of \(750{,}000\) milligrams. How many kilograms is that?

Solution

The question asks you to go from milligrams to kilograms, which is smaller to bigger. Furthermore, there are two levels of conversion, from milligrams to grams, and then from grams to kilograms. This is the math:

\[750{,}000 \div 1{,}000 = 750\] \[750 \div 1{,}000 = 0.75\]

The bag of apples has a mass of \(0.75\) kilograms.

United States Customary Units of Weight

In the US customary system, we measure weight rather than mass. The most common units are ounces (oz), pounds (lb), and tons:

  • \(16\) ounces \(= 1\) pound
  • \(2{,}000\) pounds \(= 1\) ton

For real-world comparison, a slice of bread weighs about one ounce, a loaf of bread weighs about one pound, and a small car weighs about one and a half tons. The conversion rules are the same as for every other unit.

A bag of flour weighs five pounds. How many ounces is that?

Solution

Pounds are bigger than ounces, so multiply by the number of ounces in a pound:

\[5 \times 16 = 80\]

The bag of flour weighs \(80\) ounces.

More Measurement Tips

As long as you remember the basic rules of converting units and know the essential concepts in this section, you’ll be able to handle any measurement problem on the ParaPathways test.

Metric Prefixes

When using the metric system, memorizing the meaning of the common prefixes is vital. You’ve seen these before, but here is a quick summary of them:

13 Metric Prefixes.png

Choosing the Appropriate Unit of Measurement

Whatever measurement system you use, it is important to find the most appropriate unit. After all, if you’re measuring a room, it makes more sense to use feet rather than miles. Here are some guidelines for both measurement systems:

14 Appropriate Units to Use.png

Multi-Step Measurement Word Problems

Some of the problems you’ll encounter, both in the classroom and on the ParaPathways test, will require additional steps to arrive at your solution. No matter how many steps are involved, however, the rules you have learned and the processes you have practiced remain the same. In this section, we’ll look at examples of more complex word problems that involve measurements.

Length

A hiking trail is \(3.5\) miles long. Lydia wants to know how many feet that is so she can figure out approximately how many steps the hike will require. How many feet is the trail? And if each of her steps is \(2.5\) feet, how many steps will she take on the hike?

Solution

You’re looking for two answers. The first will involve converting from miles to feet. That process you’ve done before and will simply require multiplication. This problem adds a new unit that you haven’t seen before, “steps.” However, you are told how many feet a step is, so you know the conversion factor.

Let’s start with the initial conversion from miles to feet. A mile is bigger than a foot, so you multiply:

\[3.5 \times 5{,}280 = 18{,}480\]

Therefore, the trail is \(18{,}480\) feet.

Now, you’re converting from feet to steps. In this case, a foot is a smaller unit than a step, so you divide:

\[18{,}480 \div 2.5 = 7{,}392\]

Therefore, for Lydia, the \(3.5\)-mile hiking trail is approximately \(7{,}392\) steps.

Liquid Volume

A fish tank holds \(150{,}000\) milliliters of water. The owner wants to know how many liters of water the tank holds. How many liters is that, and what is that in kiloliters?

Solution

This is another multi-step problem where we’re looking for two separate but related answers. This time, we’re working in the metric system, so the conversions are fairly simple. All you need to remember is that there are \(1{,}000\) milliliters in a liter, and there are \(1{,}000\) liters in a kiloliter. First, convert the given milliliters to liters by dividing:

\[150{,}000\div 1{,}000 = 150\]

So, the fish tank holds \(150\) liters. Now, what is that in kiloliters? Just do another conversion:

\[150 \div 1{,}000 = 0.15\]

So, the fish tank holds \(0.15\) kiloliter.

Note: You can use the decimal point trick here. When multiplying by a power of ten, the decimal moves to the right the same number of place values as there are zeros, and when dividing by a power of ten, the decimal moves to the left by the number of zeros.

Since we were moving from smaller units to bigger units, we were dividing; thus, \(150{,}000\) became \(150\) (the decimal moved left three spaces) and then \(0.15\) (left another three spaces).

Mass

A package has a mass of \(2.5\) kilograms. The shipping company charges by the gram. How many grams is the package? Also, how many milligrams is that?

Solution

Even though we’re dealing in mass instead of volume, you will find the answers with the same processes you just did. Furthermore, the units are metric, so you can find the answer even faster with the decimal point trick.

A kilogram is equal to \(1{,}000\) grams, so you’re multiplying, or moving the decimal point three spaces to the right, as such:

\[2.5\text{ kg} = 2{,}500\text{ g}\]

To get milligrams, move the decimal another three places, giving you:

\[2{,}500\text{ g} = 2{,}500{,}000\text{ mg}\]

Helping Students: When students aren’t sure whether to multiply or divide in a conversion, ask them to predict first: “Should the answer be a bigger number or a smaller number?” Converting to a smaller unit always takes more of that unit. So, if a student converts three feet to \(0.25\) inches, that prediction shows the answer can’t be right.

All Study Guides for the ParaPathways are now available as downloadable PDFs